Power Pack and Charging
5.9
Charge Tank (if equipped)
The Charge Tank is a quick charging accessory. It reduces
the time to fully charge the power pack (compared to the to
the Level 1 existing integrated charger) and is designed to
work with Level 2 public charging stations operating on the
popular J1772/IEC 62196 standard.
Note: For motorcycles with a ZF7.2 battery pack, using the
On-Board charger in conjunction with the Charge Tank is
not supported because it will exceed the max charging rate
for the battery pack. A fault code will display on the dash
and the motorcycle will not charge at the expected rate.
Using the Charge Tank
1. Ensure that the key switch is in the ON position.
2. Open the charging connector protective cover (A).
3. Plug the J1772 charging connector into the Charge
Tank charging receptacle (B). Once connected,
charging automatically starts.
4. The charging icon on the dash flashes as the battery is
being charged. Once charging is complete, the
motorcycle will turn off and the icon will not be
illuminated. See “
Warning Indicator Lights”, on
page 3.10.
5. Once charging has started, turn the key switch to the
OFF position and remove the key.
6. When you’re ready to ride, disconnect the charger and
reinstall the protective cover.
Zero Owner's Manual (S and DS).book Page 9 Wednesday, February 28, 2018 11:21 AM
To Next Page
Loading...
Need help?
General
