General Operation
4.8
WARNING! The ABS computer compares the relative
speed of the front and rear wheels. Using tires other than
those specified by Zero Motorcycles can adversely affect
the ABS functionality and stopping distance of your
motorcycle.
WARNING! If the ABS warning indicator is illuminated
when traveling at speeds exceeding 3 mph (5 km/h), the
ABS is not functioning. When the ABS system is not
functioning, your motorcycle will operate as a non-ABS
equipped motorcycle with increased stopping distance and
unpredictable brake control.
WARNING! If the front and rear wheel speeds vary in
speed significantly, such as during a burnout, wheelie, or
off road riding, the ABS indicator will illuminate and disable
ABS.
Note: To reactivate the ABS, bring the motorcycle to a
complete stop, then turn the key to the OFF position, wait
for approximately 5 seconds, then turn it back to the ON
position. The ABS light should extinguish once both
wheels reach 3 mph (5 km/h) and be fully functional.
Zero Owner's Manual (S and DS).book Page 8 Wednesday, February 28, 2018 11:21 AM
To Next Page
Loading...
Need help?
General
