Zero DSR 2018

Maintaining Your Motorcycle
6.4
7 Drive Belt - Check belt tension.
- Inspect belt for signs of damage
or cracking.
Replace belt:
- Every 24K mi (37K km).

8 Steering
Bearings
- Check for looseness.
- Repack with all-purpose grease.
Repack 
9Chassis
Fasteners
- Check all chassis fasteners and
fittings.
- Tighten and adjust as needed.

10 Front Brake
Lever Pivot
Shaft
- Apply silicon grease lightly.
- Check operation.
- Service/rebuild if necessary.

11 Front Fork - Check operation and for oil
leakage.
- Service/rebuild if necessary.
 
12 Rear Shock
Absorber
Assembly
- Check operation and for oil
leakage. Replace if necessary.  
13 Throttle Grip - Check operation and free play.
 
# ITEM ROUTINE EVERY
RIDE
INITIAL INITIAL ODOMETER MILEAGE READING
600 mi
(1K km)
or
1 month
4K mi
(7K km)
or
6 months
8K mi
(13K km)
or
12 months
12K mi
(19K km)
or
18 months
16K mi
(25K km)
or
24 months
20K mi
(31K km)
or
30 months
Zero Owner's Manual (S and DS).book Page 4 Wednesday, February 28, 2018 11:21 AM