Zetor 8621 Forterra turbo - (A) Rear Three Point Hitch; (B) Rear Three Point Hitch with Hook Ends - Cbm

134
HITCHES
(A) REAR THREE POINT HITCH
Rear three point hitch is intended for
attaching the carried or semi-carried
agricultural machines and implements
with hitch points of category II according
to ISO regulation. The center distance of
lower link joint balls is 870 mm. The
inner opening of lower link ball is 28,5
mm. The inner opening of top link ball is
25,5 mm.
1.
Top link
2. Left lift link
3. Right lift link
4. Lower draft links
(B) REAR THREE POINT HITCH WITH
HOOK ENDS - CBM
Reinforced three point hitch CBM
with hook shaped ends is
assembled as a standard on
tractors Z 11641. Hitch is intended for
attaching the carried or semi-carried
agricultural machines and implements
with hitch points of category II according
to ISO regulation. Diameter of lower pins
is 28,5 mm. Diameter of top link pin is
25,5 mm.
5. Top link
6. Left lift link
7. Right lift link
8. Lower draft links
9. Movable collar with handles
F 191
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz