199
ADJUSTMENT
F 293 F 294
ADJUSTING THE LIFTING LINKS OF
PICK UP HITCH
Chose the position control - "P" by hyd-
raulic selection control lever. Raise the
hydraulic lifting arms into the upper po-
sition. Adjust the telescopic links that
way you thread the lock nuts to guiding
tube without play. Than unscrew the nuts
by 4 threads.
ADJUSTING THE PUSH-PULL CABLE
Adjust when the carrier with towing hook
is in full contact with carrier hooks. The
push pull cable must be under
tensioning that way to be the lever in cab
without play. Lock the push pull cable by
lock nut against loosening.
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
