What to do if Zeversolar Eversol TL1000-20 Inverter shows Permanent Fault 1, 2, 3, 4, 8, 9?
If your Zeversolar Inverter displays Permanent Fault 1, 2, 3, 4, 8, or 9, disconnect it from both the utility grid and the PV array. Wait for 3 minutes, then reconnect it. If the fault persists, it may require professional attention.
What to do if Zeversolar Eversol TL1000-20 displays Fault 41, 42, 43, 44, 45?
If your Zeversolar Inverter is showing Fault 41, 42, 43, 44, or 45, disconnect it from both the grid and the PV array. Wait 3 minutes before reconnecting. If the fault continues to appear, the device may need servicing.
What to do if Zeversolar Eversol TL1000-20 Inverter shows Presumable Fault 35?
If your Zeversolar Inverter shows Presumable Fault 35, check the fuse and the circuit breaker in the distribution box. Also, examine the grid voltage, grid usability, AC cable, and grid connection on the inverter. If the fault persists after these checks, it might require professional assistance.
Why Zeversolar Eversol TL1000-20 displays Presumable Fault 34?
If your Zeversolar Inverter displays Presumable Fault 34, check the grid voltage and the grid connection on the inverter itself. Also, check the grid voltage at the point where the inverter connects. If the grid voltage is outside the permissible range due to local grid conditions, try to modify the monitored operational limits after informing the electric utility company first. If the grid voltage remains within the permitted range and the fault continues, it may require professional assistance.
What to do if Zeversolar Eversol TL1000-20 displays Presumable Fault 33?
If your Zeversolar Inverter displays Presumable Fault 33, check the grid frequency and how often major fluctuations occur. If the fault is due to frequent fluctuations, consider modifying the operating parameters, but only after informing the grid operator.
What to do if Zeversolar Eversol TL1000-20 Inverter displays Presumable Fault 38?
If your Zeversolar Inverter is showing Presumable Fault 38, check the PV array’s insulation to ground, ensuring the insulation resistance is greater than 1 MOhm. Perform a visual inspection of all PV cables and modules. Ensure the inverter's grounding connection is reliable. If the fault occurs frequently, it may require professional assistance.
How to fix Presumable Fault 36 on Zeversolar Eversol TL1000-20 Inverter?
To address Presumable Fault 36 on your Zeversolar Inverter, first ensure the grounding connection of the inverter is reliable. Then, perform a visual inspection of all PV cables and modules. If the fault persists, it may require professional assistance.
What causes Presumable Fault 37 on Zeversolar Eversol TL1000-20 Inverter?
If your Zeversolar Inverter displays Presumable Fault 37, check the open-circuit voltages of the strings to ensure they are below the inverter's maximum DC input voltage. If the input voltage is within the permitted range and the fault persists, it may require professional assistance.
What causes Presumable Fault 6 on Zeversolar Inverter?
If your Zeversolar Inverter displays Presumable Fault 6, check the open-circuit voltages of the strings to ensure it is below the maximum DC input voltage of the inverter. If the input voltage is within the permitted range and the fault still occurs, it may require professional assistance.
General| Max. DC Voltage | 550 V |
|---|---|
| Nominal AC Power | 1000 W |
| Nominal AC Voltage | 230 V |
| Dimensions | 310 x 251 x 162 mm |
| Weight | 6.5 kg |
| Protection Degree | IP65 |
| Rated Power Output | 1000 W |
| Number of MPP Trackers | 1 |
| Maximum Input Current | 10 A |
| Power Factor | >0.99 |
| THD | <3% |
| Cooling Method | Natural Convection |
| Protection Level | IP65 |
| Output Voltage Range | 180-280 V |
| Operating Temperature Range | -25°C - +60°C |
To Next Page