Zhiyun CRANE - M2 S User Manual

17
After balancing CRANE-M2 S, the motor torque needs to be adjusted for proper
function. You can adjust the motor torque according to the weight of your camera
and lens, so that the CRANE-M2 S can be used in its ideal state. Following are two
methods for adjustment. It is recommended to use auto-calibration.
1. auto: Auto calibration will adjust the motor torque according to the weight of
the carried camera and lens. Select “auto” under the “motor” menu using the
joystick to enter calibration. You can see the calibration progress on the screen.
When a “
√
” mark appear on the display screen, the auto torque adjustment is
completed.
Motor Torque Adjustment
How to Use CRANE-M2 S
When performing auto-calibration, please make sure that the three axes are
unlocked and the gimbal is straightly put on a flat surface. Please don't touch
the gimbal when calibrating.
*motor
advance
joystick
*auto
level
custom
2. level: Three levels (Low/Medium/High) are provided. Select the appropriate
level according to the weight of the carried camera and lens.
auto
*level
custom
low
*medium
high

Zhiyun CRANE - M2 S Specifications

General

Model	CRANE-M2 S
Type	3-Axis Handheld Gimbal Stabilizer
Max Payload	720g
Weight	549g
Pan Angle Range	360°
Bluetooth	Yes
Charging Time	1 hour 41 minutes
Dimensions	240 x 68 x 150 mm
Battery Type	Built-in Li-ion
Display	OLED screen
Compatible Devices	Smartphones, Action Cameras, Compact Cameras
USB Charging	Yes (USB-C)
Follow Modes	Pan Follow, Lock, POV, Vortex, Go
Control Interface	Joystick
Battery Runtime	Up to 10.5 hours