Zhiyun CRANE - M2 S

10
Mounting and Balancing
Mounting the Action Camera
Mount the action camera to the camera base (not provided) and mount the
whole base to the quick release plate. Make sure to tighten the screw.
CRANE-M2 S only provides stabilization for mobile phones and action
cameras. Button controls are not supported.
Balancing
1. Horizontal Balance of the Tilt Axis
Unlock the tilt axis arm ① and loosen the tilt axis latch ② . Push the camera to
move forward or backward ③ until the camera is steady and is at almost level
with the ground ④ . Tighten the latch ⑤ .
①
②
③
④
⑤