65xx-A1 Family Router Users Guide 65
Differentiated Services Code Point (DSCP) is a means to classify packets in the IP header of
the packet.
To associate an interface with QoS:
3. From the Queue Config page, click Add.
4. In the QoS Queue Configuration page enter the name of the queue and enable the queue
by selecting Enable from the Queue Configuration Status drop down.
5. Select the interface from the Interface drop down.
6. Set the priority for the queue from the Precedence drop down. For WAN interfaces, only
Path 0 is supported for DSL Latency.
To Next Page
Loading...
