Handleiding Internet van Ziggo 19
4. Web configuration
To make sure that you can access the Internet successfully, please check the
following first.
1. Make sure the connection (through Ethernet) between the Wireless Voice
Gateway and your computer is OK.
2. Make sure the TCP/IP protocol is set properly.
3. Subscribe to a Cable Company.
4.1 Accessing the Web Configuration
The Wireless Voice Gateway offers local management capability through a
built-in HTTP server and a number of diagnostic and configuration web pages.
You can configure the settings on the web page and apply them to the device.
Once your host PC is properly configured; please proceed as follows:
1. Start your web browser and type the private IP address of the Wireless Voice
Gateway on the URL field: 192.168.0.1
2. After connecting to the device, you will be prompted to enter username and
password. By default, the username is ziggo and the password is draadloos.
figure 7: Login dialogue
If you login successfully, the main page will appear.
To Next Page
Loading...