Handleiding Internet van Ziggo 67
MAC Restrict Mode Click Disabled to welcome all of the clients on the
network; select Allow to permit only the clients on
the list to access the cable modem; or choose
Deny to prevent the clients on the list to access
this device.
MAC Address Your Gateway identifies wireless PCs by their
Wireless MAC Address. This address consists of a
string of 6 pairs of numbers 0-9 and letters A-F,
such as 00 90 4B F0 FF 50. It is usually printed on
the Wireless card of the device (e.g. the PCMCIA
card in a laptop).
Apply After proper configuration, click Apply to invoke
the settings.
Connected Clients: The information of currently connected clients will
be displayed here.
To Next Page
Loading...