17
Installation instructions
805845UK v1.02 July 2018 - G4 Command Centre
Technical support
Tel: 0345 6 005 005 Email: service@zipindustries.co.uk www.zipwater.co.uk
1.4.1 Ventilation for all models
• The clearance envelope dimensions stated in the specification sheets and installation instructions must
be observed.
• Adequate ventilation must be provided to ensure that the cupboard space temperature does not exceed
35
0
C.
1.4.2 Preferred arrangement
• 4mm door buffers (at the four corners of each door) supplied with the Command Centre should be used
to provide adequate ventilation in normal usage, see illustration below.
Door buffer
1.4 BO & BA Commercial, BO & BA Residential Command Centres
Ventilation
To Next Page
Loading...
