EasyManua.ls Logo

Zip Hydroboil 305552 - Warnings and Precautions

Zip Hydroboil 305552
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
03
Installation instructions & user manual
804545UK V2.03 Aug 2018 - Zip Hydroboil
Technical support
Tel: 0345 6 005 005 Email: service@zipindustries.co.uk www.zipwater.co.uk
WARNINGS AND PRECAUTIONS
!
This manual contains important safety and installation instructions for the Zip Hydroboil.
Please read all warnings, installation requirements and installation instructions before installing any
Zip Hydroboil. This system must be installed in accordance with water supply byelaws, current IEE
regulations and relevant local authority byelaws.
Warnings
The Zip Hydroboil
must be earthed. The resistance of the earth connection from each exposed metal part
must be less than 1Ω.
All installation and service work must be completed by trained and suitably qualified tradespeople. Faulty
operation due to unqualified persons working on this product, or any other Zip product may void warranty
coverage.
Never attempt to install a Zip Hydroboil instant boiling water heater without reading all of the applicable
instructions.
Do not remove the cover of the Hydroboil under any circumstances without first isolating it from the power
supply.
In hard water areas mineral scale accumulation in the boiling chamber of the Zip Hydroboil may become a
problem, consideration should be given to the maintenance required. A suitable form of water treatment may
be necessary.
The Zip Hydroboil instant boiling water heater is not intended for use by young children or infirm people
without supervision.
Young children should be prevented from having access to ensure that they are not able to use or play with
the Hydroboil.
Do not use strong, corrosive or abrasive cleaners to clean the case of the Hydroboil.
The ambient temperatures this Hydroboil must operate within is 5ºC - 50ºC.
The Hydroboil is intended only for indoor use and should never be installed outdoors or be exposed to the
elements of nature.
This Hydroboil must not be positioned in an area that may be cleaned by a water jet. The Hydroboil must not
be cleaned by a water jet.
As the installer, it is your responsibility to supply (if necessary) and install all valves as required by local
regulations and relevant standards.
The Hydroboil is rated for 230V 50Hz AC operation.
Due to the process of continuous improvement, Zip reserves the right to change details mentioned in this
manual, without notice.
Visit www.zipwater.co.uk to ensure you have the latest copy of this document.

Related product manuals