10 807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
UV-C Module*** Specification
Rated service flow 2.8 L/min
Maximum working pressure (applies
to UV-C Module, not Command
Centre)
830 kPa
Maximum operating temperature 50 °C
Operating voltage 12 V DC
***This Class B system or component conforms to NSF/ANSI 55 for the supplemental
bactericidal treatment disinfected public drinking water or other drinking water that
has been tested and deemed acceptable for human consumption by the state or local
health agency having jurisdiction. The system is only designed to reduce normally
occurring non-pathogenic nuisance microorganisms. Class B systems are not intended
for treatment of contaminated water.
UltraCare Command Centre BCU40 BCU60 BCU100
Boiling water (cups per hour)* 160 160 240
Chilled water (glasses per hour)* 125 175 175
Power rating @ 220-240V, 50Hz
(kW)
1.97 2.1 2.1 + 2.2**
Power rating @ 220V, 60Hz (kW) 1.84 2.0 2.0 + 2.2**
Dimensions (W x D x H) (mm)
395 x 464 x 333
With Duct and Vent Tray:
450 (500)
#
x 464 (520)
#
x 333 (373)
#
Dry weight (kg)*** 30
Ambient operating temperature 5 - 35 °C
Boiling water temperature setpoint 98°C
Chilled water temperature setpoint 5 - 9°C
Chilled water coolant R134a or R290
* 1 cup = 167 mL, 1 glass = 200mL
** power rating of the Booster
*** Add 5 kg when full of water
# including vent tray
SECTION 4: Technical data
To Next Page
Loading...
