EasyManua.ls Logo

Zip HydroTap G5 - SECTION 5: In-Field Sanitisation Procedure; Sanitisation Preparation and Kit Connection

Zip HydroTap G5
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
Operation & maintenance
Please refer to the User Guide for all operational and maintenance features of
the HydroTap. The User Guide is located in the HydroTap Command Centre
filter door.
Zip offers a fully-inclusive HydroCare Service Plan to take care of all routine
maintenance, including filter replacements, sanitisation, electrical safety
inspections as well as general maintenance of your HydroTap. For more
information, visit our websites:
(Australia) www.zipwater.com /hydrocare
(UK) specify.zipwater.co.uk
The Zip filter should be replaced as recommended on the filter label, or earlier
if you notice a persistent reduction in water flow from the tap or an increase in
chlorine, taste or odour in the water. Not changing the filter cartridges when
required may affect the water quality.
For safe operation after periods of non-use longer than 48hours, flush the
HydroTap for at least 60 seconds.

Other manuals for Zip HydroTap G5

Related product manuals