Zip HydroTap G5 - SECTION 11: Connect the Booster

Quick Start Installation Guide
807042 v1.02 08.22 HydroTap G5 UltraCare Install Instructions
19
SECTION 11: Connect the Booster
Hold connections
with spanner
while tightening hoses
3/8" BSP
connections
Do not connect to electrical power until commissioning.
Do not over tighten hose connections.
Braided hoses supplied cannot be lengthened.
Strainer
Cold water into Booster,
connect to Command Centre
BYPASS OUT
see page 21
Hot water out of Booster,
connect to Command Centre
BYPASS IN
see page 21