Quick Start Installation Guide
807119 v1.08 05.23 G5 BCS Quick Start Guide
35
SECTION 14: Commissioning
• Check the adapter seal
is present and correctly
positioned in the adapter.
• Install the HydroTap Clean
adapter (1) into the filter
head.
• Turn the adapter a quarter
turn to the right until it
comes to a stop and locks.
HYDROTAP CLEAN PREPARATION 12:12 PM
Step 3.
Install HydroTap Clean adapter (1) into filter head.
Step 4.
Insert HydroTap Clean can (2) into adapter (1).
Filter head
HydroTap Clean
adapter (1)
• Remove the lid from the HydroTap
Clean can (2).
HydroTap Clean
can (2)
To Next Page
Loading...
