March / 2014 Page 13 CEX-O_CEX-U_Installation, Maintenance and User Instructions V1.02
Operation
The appliance switches on automatically when
the hot water tap is opened and switches off
automatically when the hot water tap is closed.
Temperature setting
The required outlet temperature can be
adjusted gradually to a higher or lower value
with the up arrow and down arrow keys.
Pressing a key once briey changes the
temperature by 0.5°C between 35°C and 42°C
and by 1°C outside that range.
Pressing a key for a longer time changes the
temperature continuously.
The required outlet temperature can be
adjusted between 30°C and 55°C.
Note: reducing the temperature below 30°C
displays “- -” and the heating function will not
operate.
Program buttons
The two program keys allow a preset
temperature to be selected quickly.
The factory setting is 35°C for program 1 and
48°C for program 2.
The preset temperature can be changed to the
current temperature setting by prolonged
pressing of the program key.
The display changes from “P1” or “P2” to the
new temperature value which becomes
available each time the corresponding program
key is pressed.
Set temperature
-1°C +1°C
35.0 - 42.0°C
-0.5°C +0.5°C
A1 A2
B1
B2
Select preset temperature
Store temperatures
2
3
4
1
Set required
temperature
Press >3
seconds
To Next Page
Loading...
Need help?
General
