ZIV F2MUX - Page 22

F2MUX
FAMILY OF CONVERTER DEVICES TYPE F2MUX 22/28
USER GUIDE - Rev. V00 (June 2021)
Loop/Test switch
LOOP/TEST
This switch has three positions. Switching upwards
executes a loop and switching downwards executes a
test. The middle position is the rest position.
LED of loop/test
LED LOOP/TEST
Amber. It lights up when a loop is being carried out in the
equipment or when a test is made and the result is
correct.
Equipment reset push-button
RESET
This resets the equipment. To activate the push-button,
use some type of tool of no more than 3 mm in diameter.