ZKTeco S922 Series User Manual

US922 USER GUIDE | 2016
17
All the available “edit” op-
tions are the same as in the
“Add user” menu.
Administrators can add
more ngerprints, register a
name if the user previously
did not enter one, add a
password, or change his/
her user authority status to
“User” or “Admin.”
After making all necessary
changes, use the scroll keys and highlight OK(M/<-). Press to save chang-
es and return to the previous menu.
Delete User(s)
Administrators can delete all or partial registered user information on the US922.
Deleting may be necessary when:
• A user’s ngerprint is no longer recognized (possibly caused by injury) or his/her
password has been forgotten.
• The user is no longer employed and his/her ngerprint(s)/password and user
information need to be
deleted from the US922
for security purposes.
Start at the User Menu:
Scroll with the
keys
and highlight Manage. Then
press OK to open the User
Manage screen:
Select the user to be de-
leted by scrolling with the
keys.
Then press the Menu
key so the drop-down
menu appears:
Use the scroll keys
and highlight Del User. Then press to select. The following Delete User screen
appears:
You can delete the user,
ngerprint or password.
Scroll with the
keys
to highlight your selection.
Press OK to delete your
selection.
The US922 will prompt you
“OKDel”?
Press OK again to conrm
deletion.

ZKTeco S922 Series Specifications

General

Brand	ZKTeco
Model	S922 Series
Category	Touch terminals
Language	English