US922 USER GUIDE | 2016
19
User Access Control
In addition to acting as an attendance recorder, the US922 is also an access control
terminal.
Using the US922 with 3rd Party Door Control Panels:
WHEN THE US922 IS USED WITH A 3RD PARTY ACCESS CONTROL PANEL, THE
US922’S SOLE FUNCTION IS VERIFYING THE IDENTITY OF THE USERS.
AFTER IDENTITY IS VERIFIED, THE US922 SENDS A 26-BIT WIEGAND SIGNAL TO
THE 3RD PARTY CONTROL PANEL PROVIDING ONLY USER-ID MATCH CONFIR-
MATION.
IT IS THE 3RD PARTY PANEL AND NOT THE US922 WHICH CONTROLS DOOR
ACCESS IN THIS CONFIGURATION.
THEREFORE, WHEN USING THE US922 WITH A 3RD PARTY DOOR CONTROL
PANEL, REFER ALL ACCESS-RELATED QUESTIONS TO THE 3RD PARTY CONTROL
PANEL MANUFACTURER AND NOT ZK SOFTWARE.
US922 as a STAND-
ALONE Door Con-
troller:
Scroll with the keys
and highlight Manage.
Press to open the User
Manage screen:
Select the user whose door
access needs to be mod-
ied by using the
keys.
Then press the Menu
key so the drop-down
menu appears:
Use the
scroll keys and highlight “User Access.”
Then press to select.
Note: The option for User Access will not be in the drop-
down menu unless the US922 Door Access Control has
been “activated.”
To Next Page
Loading...
Need help?
General
