ZKTeco SA32-E - Specifications; Technical Parameters; Factory Default Settings; Light and Sound Indicators

1. Specifications:
1.1Technical parameters:
NO Item Value
1
Operating voltage
DC 12V±10%
2
Operating current
< 100mA
3
Dimensions
120mm×78mm×22mm
4
Weight
110g
5
Ambient temperature
0

—60

6
Relative humidity
20%—80%
7
Storage
1000users
8
Card type (alternative)
EM(ID) card(IC card for options)
9
Card reading distance
1
－
15CM
1.2 Factory Default:
1.3 Light and Sound indicates:
Light: red and green
Light Description
Access control status
Red light flash every 1 sec
（
Slow flash
）
Holding state
Red light is always ON
Programming state
Green light is always ON within Open time
Unlocking state
Green light flash every 0.5sec (Fast flash)
Pending further action
Sound ：
buzz
Description
I ndicates
1 short buzz
Valid input
3 short buzz
Invalid input
1 long buzz
Program success
Continuous long buzz
Restoring factory programming passwords
Programming
Password
123456
Common Access
Password
None
Backlight Auto (for options)
Relay Unlock
output
5 Seconds
W26 port Input (for options) Security mode OFF
Open mode
Card or Access Password
Access Password include Private Access Password (PIN) and
Common Access Password