ZKTeco SpeedFace M4 Quick Start Guide

Clickon > [COMM.] > [Ethernet]to set the network parameters. If the TCP/IP
communication of the device is successful, the icon will be displayed in the
upper right corner of the standby interface.
Clickon > [COMM.] > [Cloud Server Setting] to set the server address and
server port,that is, the IP address and port number of the server after the software is
installed. If the device communicates with the server successfully, the icon will be
displayed in the upper right corner of the standby interface.
HTTPS
Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.Personalize Attendance
Search
Autotest
System Info
Access Control
L
Clickon to enter the access control management interface > [Access Control]
and set relevant parameters of access control.
Ethernet and Cloud Server Settings
Access Control Settings
9

ZKTeco SpeedFace M4 Specifications

General

Brand	ZKTeco
Model	SpeedFace M4
Category	Touch terminals
Language	English