ZKTeco SpeedFace M4 Quick Start Guide

Detection Management Settings
Click on > [System] > [Detection Management] to enter the setting interface.
Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.Personalize Attendance
Search
Autotest
System Info
Access Control
L
Enable mask detection
Deny access without mask
Allow unregistered people to access
Enable capture of unregistered person
Trigger external alarm
Clear external alarm
External Alarm Delay(s)
Detection Management
10
You can Enable mask detection function, and enable the Deny access without
mask and the Trigger external alarm, the device will send an alarm prompt when
the user doesn’t wear a mask, meanwhile the user will be forbidden to access, as
shown in the following figure.
When the Allow unregistered people to access is enabled, you can also set Enable
capture of unregistered person to save the user photo.
1
2
12:00
Without mask
Failed to verify.
Verify:Face
User ID:2
12:00
Successfully
verified
Name:Mike
User ID:2
Verify:Face
Mask Detected
11
System
Date Time
Access Logs Setting
Face
Palm Parameter
Reset
Device Type Setting
Detection Management

ZKTeco SpeedFace M4 Specifications

General

Brand	ZKTeco
Model	SpeedFace M4
Category	Touch terminals
Language	English