ZKTeco SpeedFace-V5L TI Quick Start Guide

Forehead Temperature Detection
Installation height: 1.55m
FOV (Field Of View) of the thermal
imaging device: 50°
Temperature detection distance:
0.3m to 1.2m
Height of the face adapted for
detection: 1.2m to 2m
155CM
Specification
Standard value Remark
Operating
Environment
Distance
(between face
and device)
Measurement
Accuracy
Indoor, Avoid wind, Avoid
direct sunlight,
16°C to 35°C (60.8°F to 95°F)
30 to 120cm (0.98ft to 3.94ft)
±0.3°C (±0.54°F)
The recommended operating
temperature is 25°C (77°F)
The recommended distance
is 80cm (2.62ft)
This value is tested at a distance
of 80cm or 2.63ft under 25°C
(77°F) environment.
Notes: The temperature measurement data is only for reference, and not for any
medical purposes.
Installation Requirements
The installation requirements and indications associated with the device are given
below:
Indoor constant Temperature
Environment
3

ZKTeco SpeedFace-V5L TI Specifications

General

Device Type	IP Access Controller
Model	SpeedFace-V5L TI
Fingerprint Capacity	10, 000
Card Capacity	10, 000
RFID Capacity	10, 000
Transaction Capacity	200, 000
Logs Capacity	200, 000
Display	5-inch Touch Screen
Wiegand Signal	Wiegand Input/Output
Temperature Detection	Yes
Palm Capacity	3, 000
Communication	TCP/IP, Wi-Fi
Interfaces	RS485, USB Host
Authentication Method	Face, Palm, Card, Fingerprint, Password
Face Recognition Speed	<0.3s
Power Supply	12V 3A
Face Capacity	6, 000 (1:N)