ZKTeco SpeedFace-V5L Quick Start Guide

Forehead Temperature Detection
Installation height: 1.55m
FOV (Field Of View) of the thermal
imaging device: 50°
Temperature detection distance:
0.3m to 1.2m
Height of the face adapted for
detection: 1.2m to 2m
150CM
Specification
Standard value Remark
Operating
Environment
Distance
(between face
and device)
Measurement
Accuracy
Indoor, Avoid wind, Avoid
direct sunlight,
16°C to 35°C (60.8°F to 95°F)
30 to 120cm (0.98ft to 3.94ft)
±0.3°C (±0.54°F)
The recommended operating
temperature is 25°C (77°F)
The recommended distance
is 80cm (2.62ft)
This value is tested at a distance
of 80cm or 2.63ft under 25°C
(77°F) environment.
Note: The temperature measurement data is only for reference, and not for any
medical purposes.
Installation Requirements
The installation requirements and indications associated with the device are given
below:
Indoor constant Temperature
Environment
4

ZKTeco SpeedFace-V5L Specifications

General

Face capacity	6000
Housing color	Black, Grey
Event capacity	200000
Built-in processor	Yes
Face recognition duration	1 s
Operating temperature (T-T)	-10 - 45 °C
Temperature measurement range	34 - 45 °C
Temperature measurement accuracy	0.3 °C
Temperature measurement distance	30 - 50 cm
Operating relative humidity (H-H)	10 - 90 %
Input current	3 A
Input voltage	12 V
Ethernet LAN (RJ-45) ports	1
Screen shape	Flat
Display diagonal	5 \
Display technology	TFT
Sensor type	CMOS
Camera resolution (numeric)	2 MP
Type	Face recognition terminal

Weight and Dimensions

Depth (with stand)	22.5 mm
Width (with stand)	91.9 mm
Height (with stand)	220 mm