ZKTeco X7 - Equipment Installation; Wall mount installation; Structure and Function; Access Control System Function

I
门磁
1. Equipment Installation
(4) Fix the device to the
back cover.
(5) Fix the screw.
(1) Remove the screw on
the bottom of device.
(2) Take away the back cover.
(3) Fix the back cover on the
wall according to the
mounting paper.
2. Structure and Function
Access Control System Function:
(1) When a registered user's identity is verified, the
Access Control device will send out signal to unlock
the door.
(2) The door sensor will detect the status of the lock. If
the door is unexpectedly opened or improperly
closed, the alarm will be triggered.
(3) It supports the exit button for opening the door
from inside.
(4) It supports door bell.
(5) If the Access Control device is dismantled, the alarm
will be triggered.
Tamper Alarm Button
Lock
Lock Sensor
Exit Button
Bell
Alarm