ZKTeco X7 User Manual

5
2. After successful deletion, the device will automatically enter the process of deleting
next user. Press [*] to exit.
 Deleting All Users
1. The administrator password
is authenticated.
2. Press [9].
(The indicator turns green
and makes a long beep.)
3. Press [9].
(The indicator turns green and
makes a long beep.)
5.Exit.
(The indicator turns red and
makes a long beep, then
automatically exit.)
4. Deletion of all users succeeds.
(The indicator turns green and
makes a long beep.)
Note: In step 3, Press [9] for automatic confirmation. Other numbers are considered
invalid. If an invalid number is entered, the device indicator turns red and makes three
short beeps, then makes a long beep and exits the process.
2. Access Control Management
2.1 Unlocking Duration Configuration
1. The administrator password
is authenticated.
2. Press [4].
(The indicator turns green
and makes a long beep.)
3. Enter the unlocking
duration. (range: 1s to 10s)
5.Exit.
(The indicator turns red and
makes a long beep again.)
4. Modification of the
unlocking duration succeeds.
(The indicator turns green and
makes a long beep.)
Note: Press [10] for automatic confirmation. For values with less than 10, press [#] to
confirm. Values greater than 10 will be considered invalid.
2.2 Authentication Mode Configuration
1. The administrator password
is authenticated.
2. Press [5].
(The indicator turns green
and makes a long beep.)
3. Enter authentication mode.
5.Exit.
(The indicator turns red and
makes a long beep.)
4. Configuration succeeds.
(The indicator turns green and
makes a long beep.)

ZKTeco X7 Specifications

General

Brand	ZKTeco
Model	X7
Category	Gateway
Language	English