EasyManua.ls Logo

Zodiac INDIGO - No Movement or Suction Issues; Filtration and Wall Climbing Problems

Zodiac INDIGO
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
1. TROUBLESHOOTING
1.1. T
HE INDIGO DOESN'T MOVE OR SUCK UP ANY LITTER
You've switched on and tried to start Indigo but it doesn't do anything.
POSSIBLE CAUSES CHECKS AND CORRECTIVE ACTION
- The red indicator light doesn't come
on when you start a cycle (Turbo or
Perfect).
- The red light comes on but the robot
won't start.
Æ Plug in another electrical appliance to check the
plug.
Æ Check the robot cable is properly connected to
the control unit.
1.2. WALL CLIMBING
Indigo goes forwards and backwards without any problems but has difficulty climbing the
walls or can't climb them at all.
POSSIBLE CAUSES CHECKS AND CORRECTIVE ACTION
- The filter bag is clogged with litter, scale or
flocculents.
- There are microscopic algae on the sides
of the pool.
- The belts have become slack.
- The belts and tracks are slipping (fatty
bodies present).
Æ Empty and clean the filter bag with clear
water. Use soap if necessary.
Æ Check the quality of the water and apply any
necessary treatment; lower the pH slightly
(remove the unit from the water prior to shock
chlorination).
Æ If necessary, clean the sides with a hand
broom.
Æ Tighten or replace the belts (never add
grease or silicone).
Æ Clean the tracks, belts and pulleys with C
essence or similar.

Related product manuals