If tangling occurs, follow these steps:
1. Remove the cleaner from the pool using the Lift System. When the cleaner is
within arm's reach, use the handle to remove from the water (Figure 17). Never
lift the cleaner out of the pool by the oating cable or swivel.
1
2
Figure 17. Remove Cleaner From Pool with Handle
2. Hold the cleaner vertically to drain (Figure 18).
3
Figure 18. Keep Cleaner Vertical to Drain Water
3. Unplug power to the cleaner at the control unit (Figure 19).
Figure 19. Unplug
Page 24
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual
To Next Page
Loading...
