ZOJE 1900D - Thread-trimming Adjustment; CP-5 Preparation and Motor Operation

22
2.4.5 CP-5 （Adjustment on Thread-trimming）
Display the step motion of thread-trimming motor and the thread-trimming actions of moving to
thread-curving position, thread-trimming, knife return, and return-to-origin.
1． Preparation
Press
to have access to CP-5.
2． Operation
（1）Operation of step motion of thread-trimming motor
User can press
& to operate the step motion of thread-trimming motor.
This function is for the staffs at their installing and debugging the knife.