Upgrading Print Server
8 - 5
Upgrading the Print Server from UNIX
(Through TCP/IP)
1. Log in as root
2. Ensure mps17.bin is located in your current working
directory.
3. Type “tftp <print server’s IP address>”.
4. At tftp prompt, type “get upgrade”.
5. Change to binary mode.
6. At tftp prompt, type “put mps17.bin”.
7. Wait for the file transfer to complete.
8. Quit from tftp.
9. Done.
Upgrading the print server from
Browser
1. Ensure mps17.bin is located in your current working
directory.
2. Enter the IP address of the print server as the URL.
To Next Page
Loading...