Troubleshooting
9 - 4
Windows 95/98/Me/NT/2000/XP
Troubleshooting
Multi-Segment LAN Environment Installation
(through the Network Print Port)
If your print server and Windows 95/98/Me/NT/2000/XP
are located on two different segments, and your Windows
NT server is used as the router/gateway you will need to
implement the following procedures in order for your print
server to function properly:
Add the RIP for NWLink IPX/SPX compatible
transport. See RIP for NWLink IPX/SPX compatible
transport Installation Procedure later in this section.
Add the frame type 802.2 for both Ethernet adapters.
See Multi-Segment Frame Type 802.2 Installation
later in this section.
To Next Page
Loading...
