The PSAdmin Utility for Windows-based
3- 14
Reset
1. Click Reset button just like a picture ＜ ＞.
2. Reset allows the user to reset the print server device in
order to establish a new connection or for new settings to
take effect.
Refresh
1. Click Reset button just like a picture ＜ ＞.
2. Refresh searches the network for all attached print
server(s).
Note: Configure the print speed in the Advanced label,
must match the printer’s speed which connect to
the print server. Undependable configuration will
cause printer to abnormal printing.
To Next Page
Loading...
