The PSAdmin Utility for Windows-based
3 - 9
Manual Setup
Manual Setup is a configuration program designed for more
experienced users of NetWare. To setup the print server by
using Manual Setup follow the steps:
1. Run PCONSOLE in NetWare 3.x or NetWare 4.x and
create the necessary parameters (Refer to your Novell
NetWare print server/Services manual for details).
2. Log into your NetWare file server as a Supervisor
(Admin.) or equivalent. From your Windows 95/98/Me,
run PSAdmin.
3. Select the print server that you wish to configure.
4. Click Properties in the tool bar and the following
screen will appear, Properties button just like a picture
＜
＞, as follow picture.
To Next Page
Loading...
