TCP/IP LPR Port Printing Installation
7 - 3
DHCP
The print server supports DHCP feature, allowing the print
server to obtain an IP address and related TCP/IP settings
automatically from a DHCP server. While the print server
supports DHCP, we strongly recommend you manually
specify a fixed IP address to the print server. By default,
the print server’s DHCP function is disabled.
Windows NT LPR Port Printing
Installation
1. Click Start, point to Settings, and select Printer.
2. Run Add Printer.
3. The Add Printer Wizard screen will appear, Select My
Computer and click Next.
4. Click Add Port.
5. From the Printer Ports box as shown in the following
picture, select the LPR Port.
To Next Page
Loading...
