Zonet ZPS2102 - Multi-Segment Frame Type 802.2 Installation

Troubleshooting
9 - 6
Multi-Segment Frame Type 802.2 Installation
1. From your Windows NT server that is used as a
router, select Start from the bottom left hand corner of
the screen.
2. Point to Settings, and select Control Panel.
3. Double-click the Network icon.
4. Select Protocols.
5. Select the NWLink IPX/SPX Compatible Transport.
6. Select Properties.
7. Select your (first) network interface card and select
Manual Frame Type Detection.
8. Click Add.
9. In the Frame Type field, select Ethernet 802.2.
10. In the Network Number field, type in an unique 8-digit
hexadecimal network number. For example:
12345ABC.
11. Select Add.
12. Repeat the Steps 8-12 for the other Ethernet adapter.
13. Restart the computer.
14. Done.