Configuration from Embedded Web Server
5 - 4
System Status
1. Click Status, it then appears the sub-menu.
2. Click System, it then as shown in the following picture.
Device Name: This option allows you to view device name
of the print server. To correct the print
server’s device name.
System Contact: This option allows you to view contact
name of the print server. To check the
print server’s contact name who in
charge of this device.
System Location: This option allows you to view Location
name of the print server. To confirm
the print server’s location name where
the print server is located in the
office’s LAN.
To Next Page
Loading...
