Configuration from Embedded Web Server
5 - 10
TCP/IP Status
1. Click Status, it then appears the sub-menu.
2. Click TCP/IP, it then as shown in the following picture.
Use DHCP/BOOTP: This option allows you to view DHCP/
BOOTP status. If there is a
DHCP/BOOTP server on your network,
this option allows the print server to
obtain IP-related settings automatically
from your DHCP server.
IP Address: This option allows you to view IP address
from the print server. The IP address must
meet the IP addressing requirements of the
network segment.
To Next Page
Loading...
