Configuration from Embedded Web Server
5 - 26
Activities/SNMP Trap Messages Description
Link Up or Link Down When the network
interface on the print
server fails, a link down
trap message is
generated; if the network
interface comes back to
life, a link up trap
message is sent.
Cold Start or Warm Start When the print server
restarts, the cold start or
warm start trap message
is generated.
Authentication Failure When the print server
received a SNMP request
with a community name
that does not match the
community name the
print server is configured
with (stored in the print
server's
memory), an
authentication failure trap
message is generated.
To Next Page
Loading...
