Zoom A1 FOUR - Page 31

2.
Turn .
Setting Explanation
YES Changes will be saved.
NO Changes will not be saved.
NOTE
If you select “NO”, the other patch memory will open without saving the changed patch memory settings.
3.
Press or .
This opens a screen for selecting the patch memory number to use for saving.
4.
Use , and – .
Select the destination patch memory number.
Function Operation
Switch to lower-numbered patch memory
Press
Switch to higher-numbered patch memory
Press
Switch to patch memory numbers 10 – 19
Press
Switch to patch memory numbers 20 – 29
Press
Switch to patch memory numbers 30 – 39
Press
Switch to patch memory numbers 40 – 49
Press
Switch to patch memory numbers 50 – 59
Press
31