Zoom A1 FOUR User Manual

Setting the AUTO SAVE function
This function can be used to automatically save changes to patch memory and effect settings when they
are made.
1.
Press .
This opens the SETTING screen.
2.
Press .
This opens the SETUP screen.
3.
Turn .
Setting Explanation
ON Automatic saving is enabled.
OFF Automatic saving is disabled.
When AUTO SAVE is ON
Patch memory and effect setting changes will be saved automatically.
When AUTO SAVE is OFF
Patch memory changes can be saved with the following procedure.
1.
After editing a patch memory, switch to a different patch.
A message conrming that you want to save the changes will appear on the display.
30

Zoom A1 FOUR Specifications

General

Looper	30 seconds
Rhythm Patterns	68
Weight	340 g (without batteries)
Simultaneous Effects	5
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Display	LCD
Patches	50
Input	1/4'' instrument jack
Output	1/4'' stereo output jack
Power	4 AA batteries
Frequency Response	20 Hz - 20 kHz +1 dB, -3 dB (10 kΩ load)
USB	Micro USB