Names of parts
Front Panel
Display
This shows information, including the names of the selected patch memory and its effects and their pa-
rameter values
Mode switch
Press this to cycle through the MEMORY, STOMP and EDIT modes.
Parameter knobs
Use these to adjust effect parameters and to make various settings.
RHYTHM button
Press to activate the rhythm.
Effect/bank buttons
In MEMORY mode, these change banks.
In STOMP mode, these turn effects ON/OFF.
In EDIT mode, these select effects and turn them ON/OFF.
/ buttons
Use these to switch effects in EDIT mode. These have the same functions as the / footswitches.
/ footswitches
In MEMORY mode, use these to switch patch memories. In STOMP mode, use these to select effects and
turn them ON/OFF, for example.
SETTING button
This opens the SETTING screen.
LOOPER button
Press to activate the looper.
7
To Next Page
Loading...
