Zoom A1 FOUR User Manual

Setting the BANK HOLD function
This function can be used to limit to the same bank when switching patch memories.
1.
Press .
This opens the SETTING screen.
2.
Press .
This opens the SETUP screen.
3.
Turn .
When BANK HOLD is ON
Switching down from the lowest patch memory in a bank will open the highest patch memory in the
same bank. Switching up from the highest patch memory in a bank will open the lowest patch memo-
ry in the same bank.
Example: current patch memory in Bank 1
When BANK HOLD is OFF
Switching down from the lowest patch memory in a bank and up from the highest patch memory in a
bank will open a patch memory in the next bank.
Example: current patch memory in Bank 1
36

Zoom A1 FOUR Specifications

General

Looper	30 seconds
Rhythm Patterns	68
Weight	340 g (without batteries)
Simultaneous Effects	5
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Display	LCD
Patches	50
Input	1/4'' instrument jack
Output	1/4'' stereo output jack
Power	4 AA batteries
Frequency Response	20 Hz - 20 kHz +1 dB, -3 dB (10 kΩ load)
USB	Micro USB