A1 FOUR/A1X FOU
structure
Signal ow
Output
EQ
Looper
Post
Looper
Output
volume
Rhythm
Tuner
Level
Effect
Patch memory
INPUT
AUX IN
OUTPUT
2 3 4 5
Pre
1
The input instrument sound passes through effects 1 – 5 in order.
( “Using patch memories (MEMORY mode)” on page 14)
The patch memory level is adjusted.
( “Using patch memories (MEMORY mode)” on page 14)
The overall sound is adjusted. This setting is retained even when the patch memory is changed.
( “Adjusting the overall audio character and output level” on page 13)
Recorded phrases can be played back in a loop. The looper can be set to before (Pre) or after (Post) the
effects and EQ.
(
“Using the looper” on page 50)
Drum sounds can be played back using built-in rhythm patterns.
( “Using rhythms” on page 46)
The overall level is adjusted.
( “Adjusting the overall audio character and output level” on page 13)
This function enables tuning the connected instrument.
( “Using the tuner” on page 41)
5