Zoom A1 FOUR User Manual

Setting the looper position
1.
Turn .
Setting Explanation
Pre The looper is positioned before the effects.
Post The looper is positioned after the effects.
HINT
This is convenient when using acoustic instruments that are loud unamplied because putting the loop-
er at the beginning of the effect chain allows sound to be played once, then looped and manipulated
without additional playing.
1 2 3 4 5
Patch memory
IN
OUT
Effect
Looper
Pre
Looper
Post
Adjusting the volume
1.
Turn .
HINT
This can be set from 0 to 100.
Looper tempo
The tempo used for the looper is shared by the effects and the rhythm.
The tempo can be set on the SETTING screen (
“Adjusting the master tempo” on page 29) or the
RHYTHM setting screen ( “Setting the rhythm” on page 47).
Changing the tempo will delete the recorded data.
52

Zoom A1 FOUR Specifications

General

Looper	30 seconds
Rhythm Patterns	68
Weight	340 g (without batteries)
Simultaneous Effects	5
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Display	LCD
Patches	50
Input	1/4'' instrument jack
Output	1/4'' stereo output jack
Power	4 AA batteries
Frequency Response	20 Hz - 20 kHz +1 dB, -3 dB (10 kΩ load)
USB	Micro USB