Functions of parts
Top
❶
Gain knob
Use this to adjust the input signal level from the MIC/GUITAR jack. (→ Adjusting the input gain)
❷
Level indicator
This indicator shows the signal level after gain knob adjustment.
The indicator color changes according to the signal level.
Lit green: Input signal is present. (−48 dBFS or higher)
Lit red: Input signal is clipping. (−1 dBFS or higher)
❸
POWER indicator
This lights when the power is on.
❹
OUTPUT knob
Use this to adjust the volume of signals output from the standard phone OUTPUT and headphone
jacks.
4
To Next Page
Loading...
