Zoom F3 - Page 7

7
■
Selecting input sources for connected equipment
An unused input will not be recorded
if “On/Off” is set to “Off”.
Select the input source, and press
to conrm. Set Input 2 also.
Mic
Use when connecting
dynamic mics
Mic (+48V)
Use when connecting
condenser mics
Line
Use when connecting line
level equipment
Line (+48V)
Use when connecting
line level equipment that
requires phantom power
• Phantom power will be supplied if Mic (+48V) or Line (+48V) is selected.
• Do not supply phantom power to devices that are not compatible with it. Doing so could damage
the device.