Zoom MULTISTOMP MS-50G+ - Page 4

4 5
Effect Types and Parameters
[ DYNAMICS ]
SLOW
ATTACK
This effect slows the attack of each note, resulting in a violin-like performance.
TIME Adjusts the attack time. 1 – 50
CURVE Set the curve of volume change during attack. 0 – 10
TONE Adjusts the tone. 0 – 100
VOL Adjusts the volume. 0 – 100
[ FILTER ]
AUTO WAH This effect varies wah in accordance with picking intensity.
MODE Sets direction of movement of the filter. DOWN, UP
SENSE Adjusts the sensitivity of the effect. 1 – 10
RESO Sets effect resonance. 0 – 10
VOL Adjusts the volume. 0 – 100
LOW-PASS
FILTER
This effect varies the low pass filter frequency according to picking intensity.
FREQ Sets minimum frequency of low pass filter. 0 – 100
SENSE Adjusts the sensitivity of the effect.
FST100 –
SLW100
RESO Sets effect resonance.
2P-10 – 4P-10
BAL Adjusts the balance between original and effect sounds. 0 – 100
ENVELOPE
GENERATOR
FILTER
This filter effect is controlled using the foot switch.
FREQ1 Sets the frequency when the foot switch is off. 0 - 100
FREQ2 Sets the frequency when the foot switch is on. 0 - 100
RESO Sets effect resonance. 0 - 100
TYPE Sets filter type.
HPF2 -
LPF4
SPEED Sets the speed of the modulation. 0 - 100
BAL Adjusts the balance between original and effect sounds. 0 - 100
VOL Adjusts the volume. 0 - 100
SEQUENCE
FILTER
The sequence filter has the flavor of a Z.Vex Seek-Wah.
STEP Adjusts number of sequence steps. 2 – 8
PTTRN Sets effect pattern. 1 – 8
SPEED Sets the speed of the modulation. 1 – 50
RESO Sets effect resonance. 0 – 10
STEP FILTER This special effect gives the sound a stepped quality.
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 50
RESO Sets effect resonance. 0 – 10
SHAPE Adjusts the effect envelope. 0 – 10