2 3
Effect Types and Parameters
[ DYNAMICS ]
COMPRESSOR
This compressor in the style of the MXR Dyna Comp.
SENSE Adjusts the sensitivity of the effect.
0 –10
ATTCK Sets compressor attack speed to Fast or Slow.
SLOW, FAST
TONE Adjusts the tone.
0 – 10
VOL Adjusts the volume.
0 – 100
RACK
COMPRESSOR
This compressor allows more detailed adjustment than Comp.
THRSH Sets the level that activates the compressor. 0 – 50
RATIO Adjusts the compression ratio. 1 – 10
ATTCK Sets compressor attack speed. 1 – 10
VOL Adjusts the volume. 0 – 100
GRAY
COMPRESSOR
This models a ROSS Compressor. Added parameters allow you to adjust the tone.
SUSTN Adjusts the sustain. 0 – 100
LO Adjusts volume of low frequencies. 0 – 100
HI Adjusts volume of high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
BLACK
OPTICAL
COMPRESSOR
This is a simulation of the Demeter COMP-1 Compulator.
Added parameters allow you to adjust the tone.
COMP Adjusts the depth of the compression. 0 – 100
LO Adjusts volume of low frequencies. 0 – 100
HI Adjusts volume of high frequencies. 0 – 100
VOL
Adjusts the volume. 0 – 100
1176 LIMITER This is a simulation of the UREI 1176LN.
INPUT Adjusts the input level. 0 – 80
RATIO Adjusts the compression ratio.
4:1, 8:1, 12:1,
20:1
REL This is a limiter that suppresses signal peaks above a certain reference level. 10 – 70
OUTPUT
Adjusts the output level. 0 – 80
ZOOM NOISE
REDUCTION
ZOOM's unique noise reduction cuts noise during pauses in playing without affecting the
tone.
DETCT Sets control signal detection level.
GTRIN,
EFXIN
DEPTH Sets the depth of noise reduction. 0 – 100
THRSH Adjusts the effect sensitivity. 0 – 100
DECAY Adjust the envelope release. 0 – 100
NOISE GATE This is a noise gate that cuts the sound during playing pauses.
DETCT Sets control signal detection level. GTRIN, EFXIN
DEPTH Sets the depth of noise reduction. 0 – 100
THRSH Adjusts the effect sensitivity. 0 – 100
DECAY Adjust the envelope release. 0 – 100
To Next Page
Loading...
